Solvent traps are the best solution for cleaning your firearm. They get the firearm functioning correctly, and more so, it’s safe for you. The excessive solvent in a firearm makes it dangerous for the user, and it also puts those first respondents at risk because the firearm can fail to perform properly. It’s also essential to know that cleaning a firearm plays a significant part in its maintenance procedure.

You can easily head out to Armory Den and get your solvent trap, and you’ll be on your way back for a proper clean-up. However, there are dos and don’ts when using a solvent trap. These are things that you should be aware of during the firearm cleaning process. Before that, it’s essential to mention that when making a purchase, ensure that you buy the exact solvent trap for your firearm. You should consider the diameter of the Glock and the size of the firearm, but these are things you’ll receive guidance on when you get to the store to drop an inquiry.

A solvent trap kit has different parts, which collectively ensure that you facilitate the cleaning process. There’s an extension tube, solvent trap end cups, storage cups, adapters, and thread mounts. A brush and oil are bought separately since they are not part of the kit, although some manufacturers give them out to their customers.

Once you have a solvent trap and your firearm ready, here are some of the things to consider.

Dos

Some things should be kept intact and always considered during the firearm cleaning process. These factors contribute to a smooth cleaning procedure and ensure that you attain success at the end of it all. These dos include;

1. Always follow every instruction as indicated in the user manual. That will guide you on what to do, how to do it, and why you are doing it.

2. If you’re not aware of what you’re doing or are stuck somewhere, please contact your manufacturer. That’s when there’s a malfunction of the solvent kit or a cleaning attempt gone wrong that you cannot handle.

3. Ensure that the barrel or a booster and the solvent trap end caps are well fitted on the solvent tube extensions during the assembling process. That also goes the same line when it comes to fitting the assembled tube to the firearm.

4. Always make room for an allowance when fitting the solvent tube extensions to the firearm’s Glock. That will enable you to charge the firearm, and that is the only way you can pave the way for the brush and oil to come and clean the firearm.

5. It’s better to retain the solvent waste for recycling rather than disposing of it. There are regulations in disposing of solvents since you cannot put them in trash cans, so it is cheaper and more convenient to store them for future use.

Don’ts

Some things should not be tried while using a solvent trap to clean your firearm. They might be dangerous, cause damage to your firearm or solvent trap, or result in unfriendly outcomes. The don’ts include;

1. Don’t force in any part of the solvent trap if the two are not compatible. This will avoid any damages to the parts; you can easily use the return policy to get the right one.

2. Don’t try to fix any part of the solvent or customize it if any issue arises. Contact your manufacturer for complaints and advice on what to do.

3. Don’t tightly fit the solvent tube extension that there is no space for you to charge the firearm. You will not be able to move forward with the cleaning process.

4. Don’t do the assembling right and forget to place the solvent storage cups inside the tube extension because there will be no organized way of collecting the solvent.

5. Don’t use the solvent trap for any other purpose but to clean your firearm only. These kits are specifically made to clean your firearm, so it might be dangerous to use them for a different purpose.

For more information on Using a Solvent Trap in Cleaning, visit armoryden.com